MoorstonePLASTERING · ILKLEY

Ilkley plasterer · Wharfedale

Smooth walls and ceilings for Ilkley homes, from stone cottages to new extensions.

Moorstone Plastering is run by Tom Parker, an experienced plasterer based in Ilkley. Skimming, full re-plastering, ceilings, plasterboarding and rendering, done tidily and finished ready to paint.

  • Based in Ilkley
  • Free, written quotes
  • Dust sheets down, mess cleared away

What we do

Plastering services

One room or a whole house. Domestic work for homeowners and landlords, and plastering for builders, kitchen fitters and other local trades.

01

Skimming

A fresh finish coat over sound walls and ceilings, including over old Artex. The quickest way to get a room ready for decorating.

02

Full re-plastering

Hacking off blown or crumbling plaster back to brick or stone, then bonding, browning or hardwall and a smooth finish.

03

Ceilings

Re-boarding and skimming sagging or cracked ceilings, and making good after roof leaks, rewires and plumbing work.

04

Period & lime work

Breathable lime plaster and repairs for Victorian and older stone properties, where gypsum can trap damp.

05

Plasterboard & dry lining

Boarding stud walls, loft and garage conversions, extensions and new partitions, taped or skimmed.

06

Rendering & repairs

External render repairs, patching and making good around new windows, doors and chased-in cables.

Ilkley's stone houses

Old stone walls need to breathe

A lot of Ilkley, Ben Rhydding and Burley was built in local gritstone in the Victorian and Edwardian years. Those solid walls were designed to take on moisture and let it out again through lime plaster.

Cover them in modern gypsum or cement and the moisture gets trapped, which is how you end up with flaking paint, salts and blown plaster a few years later. We'll look at what's on your walls now and tell you honestly which approach suits them.

 Lime vs gypsum
BreathabilityLime lets solid stone walls dry out. Gypsum largely seals them.
MovementLime flexes with older buildings. Gypsum is rigid and can crack.
Best forLime: pre-1920s solid walls. Gypsum: modern block, brick and plasterboard.
DryingLime cures slowly over weeks. Gypsum finish is quicker to decorate.

How it works

From first message to finished wall

  1. Send a few photosWhatsApp or email pictures of the room and a rough size. Small jobs can often be priced from photos alone.
  2. Visit and quoteFor bigger jobs we'll come round, check the walls and give you a clear written price.
  3. Protected and plasteredFloors and furniture covered, old plaster removed if needed, then the work done properly.
  4. Cleaned upWaste taken away and the room left tidy, with advice on when you can paint.

Where we work

Ilkley and the rest of Wharfedale

We're based in Ilkley and cover the surrounding towns and villages. If you're just outside the list, ask.

  • Ilkley
  • Ben Rhydding
  • Burley-in-Wharfedale
  • Addingham
  • Menston
  • Otley
  • Bolton Abbey
  • Silsden
  • Steeton
  • Pool-in-Wharfedale
  • Guiseley
  • Bingley

After we've gone

Looking after new plaster

Most problems with new plaster come from decorating too soon. Here's the short version.

Let it dryA skim usually needs a week or more; new plaster on boards or backing coats can take around four weeks. It turns from dark pink to an even pale colour when it's ready.
Mist coat firstSeal bare plaster with a watered-down coat of plain matt emulsion before your top coats, so the paint doesn't peel.
Keep air movingGentle heat and an open window help. Don't blast it with heaters, which can make the plaster crack.

Questions

Common questions

How much does it cost to plaster a room?

It depends on the size, the state of the existing walls and whether it's a skim or a full re-plaster. Send photos and rough measurements and we'll give you a fixed price rather than an open-ended day rate.

Can you skim over Artex?

Usually, yes. Artex ceilings and walls can be sealed and skimmed to a flat finish. If the Artex is old and you're unsure what's in it, leave it undisturbed and mention it when you get in touch.

Do you work on old stone houses?

Yes. Many Ilkley homes have solid stone walls that need breathable lime plaster rather than gypsum. We'll tell you what's suitable before any work starts.

Do you supply materials?

Yes. Quotes include plaster, beads, boards and everything else the job needs, so there are no surprise extras.

How soon can you start?

Get in touch with the job details and we'll give you the earliest date we can do it, and stick to it.

Do you work for builders and other trades?

Yes. We plaster for local builders, kitchen and bathroom fitters, electricians and roofers who need walls and ceilings made good.

Free quote

Tell us about the job

Fill in the form, or get in touch directly. Photos help us price it quickly.

You can send photos on WhatsApp to 07506 647721 after submitting.

Call WhatsApp